5 Key Takeaways on the Road to Dominating Cutting

Why Waterjet is the Best Method for Cutting Flat Materials Since the 1950s, waterjet cutting has been around, developed as a way to cut lumber from large trees. Because of advancements and improvements through the year, the waterjet method has been used in many applications in cutting flat materials including stainless steel and aluminum. High pressure stream of water is used for the waterjet method in order to cut or clean materials. This cutter is usually connected to a high-pressure water pump with the water being released from the nozzle, which then cuts through the material with high-speed water. To help cut the materials abrasives are added to the water. Using waterjet cutting has many benefits including some of those given below.
Waterjet – Getting Started & Next Steps
One of the benefits of using waterjets is that it is very powerful. If you don’t expect waterjet to be that powerful just imagine that it can cut through eight inches of stainless steel plate and 10 inches of aluminum plates.
Waterjet – Getting Started & Next Steps
When cutting materials that are sensitive to high temperatures generated by using other methods, waterjet cutting is the preferred method. This is because there is no heat-affected zone and so it minimizes the effect of heat which allows metal to be cut without altering or damaging the surface of the material being cut. Waterjet cutting is precision cutting. The accuracy of waterjet cutting is 0.13mm and its repeatability is 0.03 mm. Using waterjet method for cutting is not only precise especially for steel and aluminum, it also provides a burr-free finish. This can save you a lot of money since it eliminates secondary surface finishing in most cases. You can also benefit from the speed of waterjet cutting. Projects using waterjet method can benefit from its speed and efficiency. With waterjet cutting you save a lot of time since it is easy to set up, it cuts faster than any other method, and you don’t need re-cutting because it is very precise cutting. Waterjet cutting is good for the environment. You cannot find any hazardous waste materials when using waterjet cutting method. With waterjet cutting you can cut large pieces of reusable scrap material so it prevents unnecessary waste of resources which cannot be done with traditional cutting methods. When using waterjet cutting for stainless steel or aluminum, there are more environmental advantages. The amount of water used in waterjet cutting is very little. It turns out to be one half to one gallon of water used per minute. This amount depends on the size of the cutting head orifice. You can also recycle the water that is used using a closed looped system. Since the waste water is clean enough, it can be filtered and disposed of through a drain. Waterjet removes airborne dust particles, smoke, fumes, and contaminants from cutting materials. This greatly improves the working environment and reduces problems arising from the machine operator’s exposure.The working environment is then improved greatly and the machine operator will have reduced problems from exposure.

Leave a Reply